---
title: Engenius SD-WAN Router
slug: legacy/engenius-sd-wan-router
description: Optimize your Engenius SD-WAN router configuration with our comprehensive guide. This document details step-by-step procedures for setting DNS IP for WAN interfaces, configuring Dynamic DNS (DDNS), and implementing DNS proxy and forwarding filtering.
docTags: 
createdAt: 2024-01-23T13:37:54.140Z
---

This guide is intended to help Engenius SD-WAN Router (ESG) users integrate a security and content filter solution.

1\. When you have your router managed through Engenius Cloud, you will be    ready for its configuration.

2\. Go to the configuration section/Gateway/Interfaces

::Image[]{src="https://api.archbee.com/api/optimize/qeNTDI134aDAkmAtZMoNc/rxJOTupiBGrlpLQtMIBcZ_image.png" size="50" width="886" height="417" position="center" caption="Interfaces" alt="Section/Gateway/Interfaces" showCaption="true"}

3\. Enable the Engenius DDNS and assign a name ex: "example."

::Image[]{src="https://api.archbee.com/api/optimize/qeNTDI134aDAkmAtZMoNc/miYsmyjdW5xh9jSm1W9KZ_.blob" size="50" width="438" height="355" position="center" caption="DDNS Name" alt="Assign a name to the DDNS ex:"example"" showCaption="true"}

4\. Check that the changes have been applied correctly from the general panel of the Gateway

::Image[]{src="https://api.archbee.com/api/optimize/qeNTDI134aDAkmAtZMoNc/6MPI_V4Pj-5hP8bOf2IXs_.blob" size="50" width="566" height="142" position="center" caption="Check" alt="Check that the changes have been applied correctly" showCaption="true"}

5\. Go to your panel and make the following configurations:

::Image[]{src="https://api.archbee.com/api/optimize/qeNTDI134aDAkmAtZMoNc/MwCfOnVRoX86of8qNV2S8_image.png" size="50" width="886" height="249" position="center" caption="Add new Network" alt="Add new Network" showCaption="true"}

::Image[]{src="https://api.archbee.com/api/optimize/qeNTDI134aDAkmAtZMoNc/jkNIWIfczJD81zcn7zJ83_image.png" size="50" width="886" height="285" position="center" caption="Standard" alt="Select Standard" showCaption="true"}

::Image[]{src="https://api.archbee.com/api/optimize/qeNTDI134aDAkmAtZMoNc/kVfYXVO1h8mjo7fT8gqP9_image.png" size="50" width="886" height="478" position="center" caption="Network's Router" alt="Connect your Network's Router" showCaption="true"}

Use the same domain that you have previously setup in your Engenius Gateway.

::Image[]{src="https://api.archbee.com/api/optimize/qeNTDI134aDAkmAtZMoNc/mgq9-7c_5btg4cIGOi0-k_image.png" size="50" width="886" height="333" position="center" caption="Dynamic Host" alt="Type your dynamic host" showCaption="true"}

::Image[]{src="https://api.archbee.com/api/optimize/qeNTDI134aDAkmAtZMoNc/IRRWAoA44N9MXzftwzdvY_imm.png" size="50" width="886" height="333" position="center" caption="choose dynamic" alt="choose dynamic host and confirm" showCaption="true"}

In case we are unable to resolve your public IP address, wait a few minutes for the DNS to propagate correctly.

1\) Go back to our Gateway and assign the DNS of Flahstart:

185.236.104.104

185.236.105.105

::Image[]{src="https://api.archbee.com/api/optimize/qeNTDI134aDAkmAtZMoNc/tqJ3hjerlQ_svf-g_DM4H_image.png" size="50" width="886" height="490" position="center" caption="Assign DNS" alt="Assign DNS" showCaption="true"}

2\) Apply the changes.

Back to the panel and we now should have our Engenius SD-WAN router synchronized.

::Image[]{src="https://api.archbee.com/api/optimize/qeNTDI134aDAkmAtZMoNc/Mar2aBdckDz0rAHmYInBE_image.png" size="50" width="886" height="227" position="center" caption="Panel" alt="Status of SD-WAN router" showCaption="true"}

**Other ways to ask**:

- How to configure on a Engenius SD-WAN router.
- Using the Engenius SD-WAN router. Here's how.