Bright Box configuration

filter configuration on bright box devices to activate the containment filter on bright box devices, please do the following connect to the control panel by entering the ip address of the bright box in the browser then enter your login credentials first, you need to change the dns of the device to do this, click on the \[ advanced ] tab at the top of the page and open the \[ broadband settings ] menu in the window that appears, choose " manual ", under " dns ip address ," and type these ips into the " primary dns " and " secondary dns " fields, respectively 185 236 104 104 185 236 105 105 click on the \[ save settings ] button to apply the changes to configure dynamic dns service , open the \[ system ] menu and click \[ ddns ] check the " dynamic dns " box and copy the following steps provider select dyndns org domain name type in the domain name com account/email enter the e mail/user name of the content filter password/key enter the password of the content filter click the \[ save settings ] button to save the changes next, you can enable the dhcp server to automatically distribute our dns to internal network devices open the \[ dhcp ] menu and enable the dhcp server item choose a lease time and enter the first and last ip address of the dhcp range please note dhcp will distribute your unique ip as a unique dns this will not cause problems since our ips have been configured as dns of the router other ways to ask how to configure the bright box router bright box router configuration how to