DNS Proxy configuration

activate the dns proxy and enter the login credentials , which are as follows login enter admin and press enter password enter dnsproxy and press enter to confirm note the password is not displayed because linux hides it a list of tasks to be performed to configure and test the virtual machine will be displayed proceed as follows if you want to change the system name, type 1 and press enter to confirm type "y" and type the name you want to use type 2 to change the network settings network name you can press enter to use the default interface name (cloudbox) or choose a new one and press enter ip address enter the free private ip you want to assign to the dns proxy ethernet interface subnet you can press enter to use the default subnet mask (255 255 255 0) or choose a new one and press enter network enter the ip of the network, then press enter note if you have, for example, the network 192 168 1 0/255 255 255 255 0, the network will be 192 168 1 0 gateway type in the network gateway and press enter mtu you can leave the default mtu value (1500) or choose a different one then press enter type t to perform some ping tests enter a domain, such as www google com, and press enter if it works, you can continue, otherwise check the network settings (step 2) enter 3 and press enter to configure it enter user name type the user name press enter to confirm important if you cannot type the @ symbol, you can use alt + 64 (the left alt on your keyboard) enter the password type in the filter password and press enter if everything is correct, you should see the word good next to status if yes, you can continue to the next step; if not, try to verify the credentials and try again enter y to confirm and then restart the system using the r character the dns proxy has been configured correctly and is now ready for operation to understand how to use the advanced tools, see the following guide docid 0vzbvqdm g9fsedffijal after restarting the dns proxy will automatically update to the latest version available, if it does not update go to the admin menu and restart the service by typing b and confirm the operation may take a few minutes, if the problem persists contact technical support other ways to ask dns proxy configuration configure dns proxy how