Why can't I surf?

in order to use our service, you will need to register your public ip(s) on our cloud panel below are some tips that may help you in case you are unable to browse if you are using a load balancer system (or backup line), you will need to add a ll public ips on your cloud panel check your router/firewall and make sure there are no filters on port 53 (dns), which could block traffic on our ip classes (185 236 104 0/24 and 185 236 105 0/24) check that our dns ( primary 185 236 104 104, secondary 185 236 105 105 ) are reachable from your network using a tool such as ping/tracer verify that the public ip(s) registered on the cloud are currently in use you will be able to view your ip via the following link https //www whatsmyip org/ verify that there are no blocking rules on dns resolution on the router/firewall to verify this you will be able to use a different port instead of the standard port (53) using the following commands, you will be able to check if there are any blocking rules on dns resolution open cmd on your device and run the following commands nslookup set port=53535 domain blocked (where domain blocked is the domain that should be blocked) if the result is 185 236 107 107 it means that the domain has been filtered, so there is a redirection on port 53 in this case you will need to disable the redirection rules on the router/firewall verify that you have correctly configured dns on your device (or via dhcp service) if you configure dns on the router, it does not mean that internally the devices use these dns, so we will need to configure a dhcp service or firewall rules to force the use of our dns on the internal network verify that your public ip is registered on the system (network menu) log in to your cloud panel and verify that your license has not expired if the problem has not been resolved, please open a support ticket by https //cloud flashstart com/customerarea/support/tickets/ other ways to ask why do i have difficulty navigating? the problems related to navigation