Netgear configuration

filter configuration on netgear if you have not yet registered for the service you can do so by clicking on the following link connect to the control panel by entering the ip address of the netgear in the address bar of any browser then log in by entering your credentials first you need to configure the dns of the device to do this click on the \[advanced] section and then open the \[ installation ] menu then click on \[ internet configuration ] in the window that opens, look for the entry dns address (domain name server) and click on use these dns servers then enter the following addresses, respectively, " 185 236 104 104 " "185 236 105 105" click on the \[ apply ] button to save the changes to configure dynamic dns service , open the \[ advanced configuration ] menu and then click on \[ dynamic dns ] check the use a dynamic dns service item and fill in the various fields as follows service provider select www dyndns org host name enter any name you like for example, enter the word filter user name enter your registration email/username password enter your password please note the password was emailed to the address specified when registering for the filter cloud finally, click \[ apply ] to make the changes at this point you can enable the dhcp server so that it automatically assigns network parameters, including our dns, to the various internal devices then open the \[ installation ] menu and click on \[ lan settings ] enable the use router as dhcp server item and enter the first and last ip of the dhcp range in the start ip address and end ip address fields , respectively please note the dhcp server will distribute the netgear's ip as the only dns since the dns of the router has been previously changed, setting our ips will be used to resolve dns requests so the traffic will be filtered alternatively, the dns of the various devices within the network can be changed manually optional deny dns changes by users it is possible to increase security by denying the user the ability to browse unfiltered, as a result of changing the dns on their device to do this, proceed as follows open the \[ security ] menu and click on \[ firewall rules ] at this point you need to create rules to block all traffic on port 53 (dns service) , both tcp and udp, except those directed to our ips then click on the \[ +add ] button and fill in the page as follows services choose the dns (tcp/udp 53) item from the drop down menu action select always allow lan users leave the any item selected wan server choose unique address start enter this ip 185 236 104 104 click \[ apply ] to save now we need to create another rule similar to the previous one except for the ip address of the start field , which must be 185 236 105 105 finally we need to create a rule to block all dns traffic directed to other ips , other than our own therefore, proceed as follows services choose dns(tcp/udp 53) action select the block always item lan users leave any wan servers leave any then click the \[ apply ] button to create the rule other ways to ask how to configure netgear router netgear router configuration how to