Teldat configuration

configure filtering on teldat devices to activate the containment filter on teldat devices, please do the following connect to the control panel by entering the ip address of the teldat device in the browser then enter the login credentials first, you need to change the dns of the device for web filtering to work on the devices, you need to configure the router and replace the dns with ours to do this, go to the router panel and enter the following commands web filtering works with dynamic and static ips if you have a dynamic ip address, configure dyndns on the router as follows optional deny dns changes by users you can strengthen security by preventing user dns changes to do this, simply create a new access list for use on the wan interface, as follows optional configure multiprofile the advanced feature called multiprofile allows you to create multiple profiles per client/license and associate them with a single network (ip address) web filter recognizes the remote network (and configuration profile) based on the public ip for example, if you have the address "1 2 3 4", you can use the following ports standard port 58 (default profile); other ports (110,143,5402,5403) as you can see, there are two profiles (default and profile 2), port 53 and 5402, respectively if you want to create two or more profiles per network (same ip address), you need to configure a different port for each profile first, enable the afs feature then change the dns request (port 53) to the new port via nat please note note that a port other than 53 must be entered in port profile2 between 110,143,5402 and 5403 please note the default port (53) connects directly, no special configuration is needed here is an example of configuring the web filter with multiprofile or dynamic dns in teldat , so that only teldat dns servers can be used other ways to ask how to configure teldat teldat router configuration how to